Cargo Global B744 at Hong Kong on Sep 22nd 2017, runway incursion forces rejected takeoff
Last Update: September 17, 2021 / 16:52:18 GMT/Zulu time
Incident Facts
Date of incident
Sep 22, 2017
Classification
Incident
Airline
ACG Air Cargo Global
Departure
Prague, Czech Republic
Destination
Hong Kong, China
Aircraft Registration
OM-ACB
Aircraft Type
Boeing 747-400
ICAO Type Designator
B744
Airport ICAO Code
VHHH
A Hong Kong Airlines Airbus A330-300, registration B-LNS performing flight HX-236 from Hong Kong to Shanghai Pudong (China) with 174 passengers and 13 crew, was cleared for takeoff from runway 07R and was accelerating for takeoff from Hong Kong's runway 07R. About 50 seconds after receiving the takeoff clearance the crew radioed they were rejecting takeoff seeing another aircraft on the runway.
Ground frequency called CW-831 and told the crew that they had not received clearance to cross an active runway, they had just committed a runway incursion, the crew insisted they were cleared to taxi via taxiway K, L2 to C12, the controller repeated they had not received clearance to cross an active runway and they would look into the matter.
Hong Kong's Civil Aviation Department (HKCAD) reported the A330 was about 1000 meters away from the Boeing 747, when they applied brakes and rejected takeoff. The occurrence was rated a serious incident and is being investigated, a high risk of collision existed.
The A330-300, that had left the gate with 25 minutes delay, was able to depart about 20 minutes later and reached Shanghai with a total delay of 40 minutes.
The Boeing departed Hong Kong about 2:20 hours after the occurrence.
On Oct 25th 2017 the Hong Kong CAD released their preliminary report reporting the Boeing 747 after vacating landing runway 07L was cleared to taxi to and hold at holding point J6, which is located short of runway 07R. The A333 was cleared for takeoff from runway 07R, the first officer being pilot flying commenced takeoff, when the 747 was approaching holding point J6 and contacted ground movement control (GMC) for further taxi instructions. GMC issued taxi instructions to taxi from taxiway K to the parking bay at the cargo apron. No runway crossing clearance was issued. However, the 747 continued past the hold short line. When the pilots of the A333 recognized the 747 was entering the runway the captain rejected takeoff, the crew brought the aircraft to a stop abeam taxiway K2, while the B744 continued to cross the runway. Tower instructed the A333 to reject at about the same time the captain rejected takeoff. Preliminary information suggests the minimum distance between the two aircraft was 1100 meters/3600 feet. Visibility was more than 10km and the runway was dry.
The captain of the B744 holds an ATPL and had accumulated 10,408 hours total with 4,296 hours on type.
In August 2021 the AAIA released their final report concluding the probable causes of the serious incident were:
Causes
A taxi instruction without a specific runway crossing clearance was misconstrued to have included a runway crossing clearance and Aircraft 1 entered RWY07R from J6 while Aircraft 2 was commencing take-off on RWY07R. This resulted in a runway incursion.
Contributing Factors
- An instruction for Aircraft 1 to contact AMS for a runway crossing clearance was not effected as a result of probable lapse of concentration.
- Verification of the position of Aircraft 1 was not effected and subsequently an incorrect assumption that the aircraft had already crossed RWY07R was made as a result of loss of situational awareness when instruction was issued.
- Clarification with ATC was not effected before entering an active runway without a specific runway crossing clearance.
The AAIA analysed that a trainee controller under supervision of an instructor was staffing ground control, the instructor took over on several occasions to avoid a ground traffic build up and returned control to the trainee. The trainee then received and handled the occurrence aircraft initially. The AAIA wrote:
Aircraft 1 then reported to GMC “holding short of RWY07R on Taxiway J6”. The instructor took control at this point and gave a taxi instruction to Aircraft 1. The instruction was to taxi via Taxiways K and L2 to parking bay C12.
The Instructor’s Decision to Take Control
Performance of the trainee in response to aircraft requests might have given the instructor an impression that the trainee was not able to maintain a complete and up-to-date mental picture of the developing ground traffic. This probably led to the instructor’s decision to take over. Within the 30 seconds after giving Aircraft 1 the taxi instruction, the instructor consecutively issued three more instructions namely (i) start and pushback approval to the aircraft at North Satellite Concourse, (ii) further taxi clearance to the RWY07L arrival, and (iii) a taxi clearance to another departure aircraft from the south apron. This series of action appeared in line with the instructor’s explanation and had been taken to avoid ground traffic building up.
Instruction Issued to Aircraft 1
The taxi instruction given to Aircraft 1 was “to taxi via K, L2 to parking bay C12”. When Aircraft 1 was on Taxiway J6 holding short of an active runway, the only option for Aircraft 1 to follow the taxi instruction was to cross RWY07R in order to join Taxiway K. A specific runway crossing clearance therefore would be required for Aircraft 1 to cross RWY07R. Although this runway crossing clearance was not issued, the crew of Aircraft 1 misconstrued that the taxi instruction included a runway crossing clearance.
In the investigation interview the instructor admitted not looking out the Tower window or using the A-SMGCS to verify the position of Aircraft 1 before issuing the taxi instruction.
The AAIA analysed further: "Consequently the instructor had a loss of situational awareness and did not realize that Aircraft 1 was only waiting to cross the runway and the required frequency change to AMS had not been given previously."
The AAIA analysed that although the visual alert of the runway incursion alert at the tower's radar screen activated, the aural signal did not sound, which delayed the detection of the runway incursion until after the crew of the A330 reporting rejecting takeoff, at which point the visual alert was noted. The tower controller had been busy coordinating with another ATC unit after issuing the takeoff clearance to the A330. The AAIA wrote the reason for the aural alert not sounding: "Post-incident inspection by technical staff found that the volume settings of the A-SMGCS were turned down and there was no technical issue with the audio function of the system. It was likely that the volume settings had been previously turned down to minimize unwanted alarms generated by the system during scheduled runway closure periods when vehicles would carry out maintenance works on the closed runway and aircraft taxiing or under tow to or from the cargo apron would still need to cross the closed runway. The exact time when the volume settings of the A-SMGCS were turned down could not be ascertained."
Metars:
VHHH 220200Z 05004KT 9999 FEW010 SCT040 29/25 Q1011 NOSIG=
VHHH 220130Z 06003KT 020V160 9999 FEW010 SCT028 28/25 Q1011 NOSIG=
VHHH 220100Z 09005KT 9999 FEW010 SCT028 27/25 Q1011 NOSIG=
VHHH 220030Z 06005KT 9999 -SHRA FEW005 SCT028 26/25 Q1011 TEMPO 4000 SHRA=
VHHH 220000Z 12005KT 080V190 9999 -TSRA FEW005 FEW010CB SCT024 26/25 Q1010 RERA TEMPO 4000 SHRA=
VHHH 212330Z 12008KT 100V180 2100 +TSRA FEW010CB FEW014 BKN024 26/25 Q1011 TEMPO 3000 -TSRA SHRA FEW010CB SCT025=
VHHH 212320Z 11018KT 2000 +TSRA FEW010CB FEW016 SCT028 26/25 Q1011 TEMPO 12020G35KT 2000 -TSRA SHRA FEW010CB SCT025=
VHHH 212300Z 02004KT 9999 VCTS FEW020 SCT032 29/25 Q1010 TEMPO 12015G25KT 2500 -TSRA SHRA FEW010CB SCT025=
VHHH 212256Z 02005KT 9999 VCTS FEW020 SCT032 29/25 Q1010 TEMPO 12015G25KT 2500 -TSRA SHRA FEW010CB SCT025=
VHHH 212230Z 07004KT 9999 FEW020 SCT032 29/25 Q1009 TEMPO 12015G25KT 2500 -TSRA SHRA FEW010CB SCT025=
VHHH 212200Z 05006KT 9999 FEW026 29/25 Q1009 TEMPO 4000 SHRA=
Incident Facts
Date of incident
Sep 22, 2017
Classification
Incident
Airline
ACG Air Cargo Global
Departure
Prague, Czech Republic
Destination
Hong Kong, China
Aircraft Registration
OM-ACB
Aircraft Type
Boeing 747-400
ICAO Type Designator
B744
Airport ICAO Code
VHHH
This article is published under license from Avherald.com. © of text by Avherald.com.
Article source
You can read 2 more free articles without a subscription.
Subscribe now and continue reading without any limits!
Read unlimited articles and receive our daily update briefing. Gain better insights into what is happening in commercial aviation safety.
Send tip
Support AeroInside by sending a small tip amount.
Newest articles
Fleet type match
Southwest B738 at St. Louis on Apr 19th 2024, engine failure
A Southwest Airlines Boeing 737-800, registration N8648A performing flight WN-5907 from St. Louis,MO to Sacramento,CA (USA), was climbing out of St.…
Fleet type match
Edelweiss A320 at Zurich on Apr 20th 2024, rejected takeoff due to engine failure
An Edelweiss Airbus A320-200, registration HB-IJU performing flight WK-140 from Zurich (Switzerland) to Sharm el Sheikh (Egypt), was accelerating for…
Subscribe today
Are you researching aviation incidents? Get access to AeroInside Insights, unlimited read access and receive the daily newsletter.
Pick your plan and subscribePartner
A new way to document and demonstrate airworthiness compliance and aircraft value. Find out more.
ELITE Simulation Solutions is a leading global provider of Flight Simulation Training Devices, IFR training software as well as flight controls and related services. Find out more.
Your regulation partner, specialists in aviation safety and compliance; providing training, auditing, and consultancy services. Find out more.
AeroInside Blog
Popular aircraft
Airbus A320Boeing 737-800
Boeing 737-800 MAX
Popular airlines
American AirlinesUnited
Delta
Air Canada
Lufthansa
British Airways